1. Twin screw main extruder: Main motor: Imported "WANNAN"or "SIEMENS" Variable frequency motor(The frequency converter will automatically change the frequency to reduce the frequency of the motor. The operating current will always run between 80%, 50%, and 30% of the rated power. This will greatly reduce the motor's operating current and achieve the effect of saving electricity).
2. Gearbox: Warranty: 3 years; (2)Concentricity deviation of output shaft and input shaft: within 0.2mm; (3)Both output shaft radial bearings are imported "IKO"and "NSK" bearings;
3. Electric cabinet box: (1)Inverter: Imported Switzerland"ABB", Japan"TOSHIBA","FUJI"; (2)PLC: Imported "SIEMENS" brand; (3)Main electrical controller:"Schneider" brand; (4)Display of electric current:Japan "OMRON" brand; (5)Temperature instruments: Japan "OMRON" brand;
4. Twin-screw Barrel
Bimetal wear-resistant and corrosion-resistant material, the base material is 45# steel, after multiple forging, quenching and tempering treatment; the cylinder is inlaid with α-101 wear-resistant and corrosion-resistant alloy bushing, which has better wear resistance and corrosion resistance than general alloy bushings.
5. Screw elements
(1)Material is 38CrMoAIA(high speed tool steel) with the best wear resistance, the whole adopts vacuum quenching treatment, hardness is HV950-1050; (2)Designed by the building block principle, and the screw element and the screw shaft are connected by an involute spline, and the screw combination can be adjusted according to the process requirements; The screw elements are all made by ourselves, with good identity and strong process repeat-ability,which is benefit for changing;
6. Screen changer+Die-head: Quick open die-head, convenient and fast, short flow path of the machine head and less material storage can significantly reduce the deterioration of the material's physical properties, yellowing, black spots and other defects;
